Chemical
  Computer
  Electrical & Electronics
  Fiberglass
  Furniture & Furnishings
  Instrumentation
  Jewelry
  Leather
  Machinery
  Mechanical Engineering
  Metallurgical
  Packaging
  Pharmaceutical
  Plastic
  Rubber
  Services to Industries
 
Add your Company

VIKRAM ENTERPRISES

 

ABOUT US:

We are more then 3 decade old business house in India and exclusively represent the following German and Italian companies:
GMN, Sieb & Meyer, MWM, Cleveland and CZE.
Our represented products mainly cater to Auto, Bearing and Machine tool industry and we work with almost all the companies in this segment.
Key applications we cater to are:
Precision and high speed Grinding, Precision and high speed Machining, Fine Milling, Routing, Drilling and Engraving.
As representatives of above companies, we offer the following services to our customers in India
Application consultation
Selection of right product
Product supply
Installation support (spindles, convertor and lubricator)
Spares support
After sales and repair services (spindles and convertors)
Further value add services we provide are
Inventory stocking for customers
Modvat benefit on supplies
Rate contracts for a year

PRODUCT :

Gmn - High Frequency Grinding Spindles :

75 Years Of Experience In The Field Of Grinding Spindles Have Shown Results. Gmn – High Speed Grinding Spindles Have Been Accepted World-Wide As The Standard For Universal Grinding Machines. Gmn's Reliability Is Derived From Over This Experience In Design, Use And Manufacture Of Precision Rotating Mechanisms.
Gmn - Belt Driven Grinding Spindles :

Type Tsa, Tsa C
  1. External Taper
  2. Speeds Upto 60000 Rpm
  3. Duplex Pair Of Gmn Precision Bearings
  4. Tsa C With Hybrid Bearings
  5. Permanently Grease Lubricated
  6. Spring Preloaded Design
  7. Suitable For Small, Medium And Large Bores
  8. Special 32 Dia. Spindles For Hob Industry
Gmn - High Frequency Machining Spindles :

With An Experience Of More Than 30 Years In The Field Of Machining Spindles, Gmn Can Today Supply High Speed Spindles For Machining Centers. The Spindles Are Suitable For Both Ferrous And Non-Ferrous Machining. Spindles Can Be Offered With Both Automatic Tool Change As Well As Manual Tool Change.
Gmn - Precision Angular Contact Spindle Bearings :

Gmn Produces One Of The Finest Spindle Ball Bearings For The Last 100 Years. Experience From The Spindle Plant Enables Gmn To Produce Spindle Bearings Best
Suited For Variety Of Speeds, Accuracy And Loads.
Gmn - Precision Deep Groove Bearing :

High Precision Deep Groove Ball Bearings Are Always The Best Solution, When
Axial Loads From Two Directions Have To Be Transmitted, And Existing Space Does Not Allow Installation Of Matched Spindle Bearings.Best Possible Guidance Of Rotating Parts Is Required And Speed Is Less Important.

Gmn - Special Bearings :
Medical Technology (X-Ray)
  1. Full Complement Ball Bearing Systems
  2. Dry Lubrication
  3. Temperatures Up To 550 °
  4. High Vacuum Up To 10 -9 Mbar
Gmn - Sprag/Roller Type Unidirectional Clutches :

Gmn Clutches Are Widely Used For Backstop, Freewheeling And Indexing Applications
These Products Have Proven Their Reliability In High Standard Applications All Over The World Throughout Decades.
There Are Some Very Special Reasons For The High Reliability Of Gmn Sprag Clutches
Gmn - Labyrinth & Gap Seals :

The Gmn Labyrinth Seals Are Made From Steel And Aluminium. Due To The Very Special Production Process We Gain Absolute Identity And Smooth Use Of The Profiles Of Inner And Outer Ring, Resulting In Optimum Sealing Performance. The Labyrinth Seals Are Supplied As Complete, Not Separable Units Of A Steel Inner Ring And An Aluminium Outer Ring With No Contact After Proper Installation.
SIEB & MEYER - High Frequency Drives For Grinding Spindles :

Sieb & Meyer High Frequency Convertors Use PAM (Pulse Amplitude Moduation) For Better Control Of High Speed Spindles. PAM Results In Less Heating Of The Motors And Thus Increasing The Life.
SIEB & MEYER - Vector Drives For Machining Spindles :

FC71 With Controlled Output Filter For High Speed Spindles Upto 2000Hz And Powers Upto 150kva
  1. Patented Control Method According To The Principle Of The Vector Control
  2. Increased Power Of The Motor Spindle By Selective Voltage Increase
  3. Modular Design
  4. Water Cooling For Models Above 80kva
  5. Sinusoidal Current
  6. Sinusoidal Output Voltage
  7. Patented Vector Controller
  8. Maximum Torque At Lower Speeds
  9. Integrated Output Filter
  10. Power Supply Units Available

MWM - Oil-Air Lubricators With Sensors For Monitoring Oil Flow :

MWM Oil-Air Lubricators For Minimal Lubrication Of Spindle Bearings
  1. PLC Unit For Easier Programming Of Pre Lubrication As Well As Lubrication Cycle
    Times
  2. Sensors For Monitoring Oil Flow Are With IP67 Protection And Can Be Also Mounted
    Close To The Spindle
  3. In-Built Oil Filter Of 3 Microns, Air Filter Of 5 Microns
  4. Pressure Gauge For Oil To Check Functioning Of The Oil Pump
  5. Interlocks Provided For Low Incoming Air Pressure, Low Oil Pressure, And Low Oil
    Levels.
Cleveland - Linear Motion Guideways :

Cleveland From Loeffingen Is An Established Manufacturer Of High Quality Linear Motion And Positioning Systems, Dressing And Profiling Machines For Diamond And Cbn-Grinding Wheels And Solutions For Special Grinding Machines Since 30 Years.
Cleveland - Wheel Dressing Machines :

A Range Of Cleveland Gapu Dressing And Profiling Machines Is Available For Diamond And Cbn Grinding Wheels Up To 500 Mm In Diameter. These Machines Can Be Delivered In Manual, Semiautomatic Or Fully Automatic Configurations For The Dressing Of Single Wheels Or Multi-Wheel Packages Depending On Your Application Requirements.
CLEVELAND - Drill Point Grinding Technology :

Drill Point Grinder Type GAS For Manufacturers And Users Of Printed Circuit Board Twist Drills Only.
Vikram - High Frequency Grinding Spindles :

Vikram High Frequency Spindles Are Manufactured With Technical Know-How From Gmn Germany. These Spindles Are Similar To The Former Tssv Series Of Gmn And Are Also Economical In Price.

CONTACT :

VIKRAM MACHINE SPINDLES
77, Morya Industrial Estate,
T-201/1, MIDC, Bhosari,
Pune-411 026, India.
Tel.: +91-20-27122499
Fax: +91-20-27124938
E-mail: vsplspi@vsnl.com
Contact Person: Dinesh Agarwal
website :www.vikramgmn.com

VIKRAM ENTERPRISES
E/G-1, Mukund Nagar,
Andheri Kurla Road, Andheri (East),
Mumbai - 400 059, INDIA
Tel : +91-22-28345464 / 65002696
Fax: +91-22-28366946
E-mail: vsmr@vsnl.net
Contact Person: Neeraj Agarwal